Environmental friendly color polyurethane waterproof coating

Product introduction

The product is a high elasticity and color polymer waterproof coating. It is made of acrylic acid elastic emulsion which is used as the base material, with a certain amount of modifiers, active agents, auxiliaries and pigments and fillers.

Product features

Environmental protection products, water-based tasteless, convenient construction, wide range of application, has obvious advantages for the construction of complex parts.

After curing, a seamless and complete elastic waterproof layer is formed, which can improve the waterproof and impermeability of construction engineering, which can not be achieved by coiled material products.

The film has high strength and extensibility, and has strong adaptability to base cracking or expansion.

It is convenient to maintain, and the original waterproof effect can be achieved only by partial repair of damaged parts.

This product has bright color, can play the role of decoration and beautification. The transparent product can be covered outside the color coating, and does not hinder the original color effect.

Construction precautions

The base course shall be smooth, firm and free from sand, and the depression shall be leveled with mortar.

Stir well before use.

When painting, pour the prepared material onto the base course and spread it evenly with a scraper or brush. Each coat should be between 0.5 mm and 1.0 mm. The construction times should be determined according to the requirements.

The experiment of avoiding water should be done after 7 days.

The storage temperature of the product is above 0 ℃ and the construction temperature is above 5 ℃.